Boat Trailer Guide Pads Pair for Guide Poles 48"

Trailer Guide Pads for Boat Trailer Guide Poles 48"

(also available in 36" length--click related products tab above)

Boat Trailer Guide Pads 48 inch by Newt are designed to fit tightly and slide on the existing pvc trailer guide poles. Once the pads are installed, the boat will have a protective padding so you will not scratch your boat on the poles when you pull your boat out of the water. Sold as a PAIR. Made in the USA. Also available in 36" length.

You may need something slippery like Newt Juice Binding Slime to help slide the guide pads on the PVC guide poles.

Many tournament ski boat trailers and wakeboard boat trailers already have PVC guide poles. If it does not have poles, many trailer stores sell kits to install on the back of any boat trailer. Some boaters with larger boats have installed them front and back for a total of 4 trailer poles. Guide poles are designed to be a guide to help center the boat. It is a great help when there is current and wind adding to the problem.

For boat ramps with steep angles, fixed guide poles may disappear underneath the waterline. In that case, some trailers have configured the PVC pole with a PVC sleeve under the Foam Trailer Guide Pads that allow the pads to slide up or down on the pole. The pads float, thus they will float up as the trailer backs up into deeper water making the guides visible again. The slide feature also allows you to use shorter poles since the guides will extend as they float up. The longer guide pads will handle larger boats or used in situations where the pads are mounted tight without the slide and float feature.

These Trailer Guide Pads are sold in pairs. The are available in 36 inch lengths or 48 inch length. They come in diameters 2 inches and 2.375 inches, to fit your poles. They are available with a brand name boat logo or unbranded with no logos.

Current Logos in stock: Ski Sanger, Ski Supreme, Malibu, Centurion, and Tige

842903037109